The most innovative ramp designed for UTVs, ATVs, Snowmobiles, Snowbikes, Dirtbikes, Motorcycles and SxS!
3,000 lbs. LOAD RATING. ONE RAMP DOES IT ALL!
NEW – 11.5” LowPro GripGlide accommodates snowmobile ski stances down to 30”
NEW – additional Retrax accessory strap mounting locations allow users to secure the ramp’s outer portions when using to load full-size UTV’s (+50”)
NEW – removable center section, with inverted hinges, allows users to unbolt – re-bolt – and use the condensed ramp for Snowbikes, Dirtbikes, and Enduro-type motorcycles (28”)
LowPro GripGlides provide the market’s safest walk when entering and exiting the vehicle or trailer
Includes Caliber's Retrax strap to easily secure the ramp to your vehicle
RampPro HD measures at 90” long x 52” wide for a safe, effective, and comfortable loading angle
A safe and effective loading solution for most Snowmobiles, ATVs, UTVs, Snowbikes, Dirtbikes, Motorcycles, and Golf Carts
Includes Caliber's Lifetime Warranty
3,000lb. rating – outside portions rated at 1,250lb. ea.
Expand the fun and capabilities of you SxS by making it street legal with this all inclusive, easy to install kit.
Fits: - All Yamaha YXZ 1000R Models
Kit includes: - Brackets for front turn signal lights - Brackets for rear turn signal lights - Strobe brake light feature - Front LED turn signal lights; 6-LED style, unless noted otherwise - Indicator lights, or harness to tie into vehicle indicators if exist* - Horn, or harness to tie into vehicle horn if exists - License plate mounting hardware and LED plate light
Kit features: - Steering column mounted turn signal/horn switch, with four way flasher activator - 6-LED front turn signals function as running lights** - Uses vehicle rear lights as rear signals, unless noted otherwise - “Strobe” indicates the brake lights strobe in the first second** **This feature can be disabled per preference
Kit includes: -Front LED turn signal lights; 6-LED style, unless noted otherwise - Indicator lights, or harness to tie into vehicle indicators if exist* - Horn, or harness to tie into vehicle horn if exists - License plate mounting hardware and LED plate light
Kit features: - Steering column mounted turn signal/horn switch, with four way flasher activator - 6-LED front turn signals function as running lights** - Uses vehicle rear lights as rear signals, unless noted otherwise - “Strobe” indicates the brake lights strobe in the first second** **This feature can be disabled per preference
This classic unisex jersey short sleeve tee fits like a well-loved favorite. Soft cotton and quality print make users fall in love with it over and over again. These t-shirts have-ribbed knit collars to bolster shaping. The shoulders have taping for better fit over time. Dual side seams hold the garment's shape for longer.
.: 100% Airlume combed and ringspun cotton (fiber content may vary for different colors) .: Light fabric (4.2 oz/yd² (142 g/m²)) .: Retail fit .: Tear away label .: Runs true to size
Pair of Gen2 2FT PHAT KAREN LED Bluetooth and Remote whips
Rokit's most controversial product to date. the PHAT KAREN whips, coming in at only 2FT tall and 1-3/4″ thick these light whips pack a massive punch! THESE DO NOT FLEX! MOUNT THEM BELOW YOUR CAGE (includes 2X karen whips, controller, relay, fuse, Rocker switch,
backed by Rokit's Lifetime Warranty against manufacture defects
but they do also offer a 50% off discount off a replacement set for for damage caused by user error.
Expand the fun and capabilities of you SxS by making it street legal with this all inclusive, easy to install kit.
Fits: - Yamaha Viking - Yamaha Viking VI
Kit includes: -Front LED turn signal lights; 6-LED style, unless noted otherwise - Indicator lights, or harness to tie into vehicle indicators if exist* - Horn, or harness to tie into vehicle horn if exists - License plate mounting hardware and LED plate light
Kit features: - Steering column mounted turn signal/horn switch, with four way flasher activator - 6-LED front turn signals function as running lights** - Uses vehicle rear lights as rear signals, unless noted otherwise - “Strobe” indicates the brake lights strobe in the first second** **This feature can be disabled per preference
Expand the fun and capabilities of you SxS by making it street legal with this all inclusive, easy to install kit.
Fits: - All Rhino Models
Kit includes: -Front LED turn signal lights; 6-LED style, unless noted otherwise - Indicator lights, or harness to tie into vehicle indicators if exist* - Horn, or harness to tie into vehicle horn if exists - License plate mounting hardware and LED plate light
Kit features: - Steering column mounted turn signal/horn switch, with four way flasher activator - 6-LED front turn signals function as running lights** - Uses vehicle rear lights as rear signals, unless noted otherwise - “Strobe” indicates the brake lights strobe in the first second** **This feature can be disabled per preference
HPS YXZ1000R PERFORMANCE INSERT & AFR+ KIT
Regular price
$558.00
Sale price
$459.00
Save $99.00
The NEW HPS Performance Insert/spark arrestor is the easiest and most affordable performance you can add to your Yamaha YXZ1000R Side x Side. Constructed with a 100% forest approved non-corrosive, high quality 304L Stainless Steel spark arrestor screen allowing you to not only add over +4 HP to your machine but keep you completely responsible and legal as you continue to enjoy your favorite recreational areas. With 60% more flow through your stock exhaust and more performance sound there is no need to buy loud slip-ons or expensive full exhaust systems. Coated in our Platinum Lite Ceramic for heat retention and a rich metallic finish. Combine the AFR+ with the HPS Performance Insert and instantly gain an additional +2 HP, total of +6 HP, increase over stock.
NOTE: Plugging the exhaust smog vents on engine valve cover is recommended/necessary when doing any performance mods on the YXZ.
The AFR+ brings together two technologies within one system to make it the most powerful, user-friendly tuning device on the market. AFR+ combines an EFI controller with a wideband O2 sensor and AFR gauge to provide a user instant fuel trimming ability and feedback about their vehicles state of tune.
The AFR+ can handle ALL your fueling needs or COMPLIMENT ECU downloads or already installed EFI controllers. The AFR gauge allows you to KNOW exactly how well your tune-up is performing. The EFI fueling allows you to CONTROL any necessary fine tuning without spending more money or valuable time.
BETTER FUEL MILEAGE - The AFR+ pays for itself! SAVING YOU $$$ The information the AFR gauge displays is all you need to get the best fuel mileage out of your vehicle. The AFR+ can be used alone or in combination with your existing fuel controller or mapping software. With a low retail cost, the AFR+ can pay for itself in ONLY 3500 miles.
BETTER HORSEPOWER and TORQUE The AFR+ allows your vehicle to be optimized to get the best horsepower and torque for the current modifications.
FUEL INJECTION CONTROL - AUTO-TUNE or FUEL TRIMMING The AFR+ has built in a piggy-back EFI control system. A piggy-back EFI control system is one where it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The AFR+ can be computer programmed into an auto-tune or a fuel trimmingoperation mode. The auto-tune mode instantly makes adjustments to the fuel curve based on the wideband O2 sensor input to match the user's desired AFR value. The fuel trimming mode allows a user to make instant changes to the duration of time the fuel injectors are fired. The AFR+ features a push button interface on the gauge allowing for quick fine tuning by the end user for each operation mode.
AFR GAUGE The AFR gauge provides the user an analog view of air/fuel ratio values between 10 and 16. The AFR gauge is the standard size of 2-1/16 inches in diameter to allow for multiple 3rd party mounting systems to be used. A self-adjusting back lighting display allows the AFR values to clearly be visible for both daytime and nightime riding.
WIDEBAND CONTROLLER - BOSCH CHIP and O2 SENSOR The wide-band controller for the AFR+ uses a Bosch micro-controller for interpreting the data from the wide-band Bosch O2 sensor. The AFR+ uses the Bosch O2 sensor part number 17018 and can be found at most local NAPA stores.
The HPS fuel controller designed by Dobeck, is the most popular fuel solution on the market. Preprogrammed for Stage 1 modifications (Intake & Exhaust upgrades) makes it the #1 EFI controller to plug and play fuel solution for great performance and install to riding time. The HPS Active Tune Programmer offers simple on-the-fly adjust-ability and access to 6 modes of adjustment using three push buttons. On board load based technology which takes into account changing loads for various riding conditions and provides a smooth dynamic tune up that breaks the drive cycle into 3 main adjustment zones instead of filling in an entire TPS vs RPM fuel grid. Combine the HPS Performance Insert with our new HPS Active Tune Programmer and add an additional +2 HP, total of +6 HP. Pre-programmed for the HPS YXZ Performance Insert for optimal performance. Easy, push button adjust-ability for any future modifications and climate change.
Features: -Dyno tested and proven -+2 HP out of the box -Water resistant -Plug and play mild tune pre-installed -Push button adjust-ability -Very affordable and easy to install
HPS YXZ1000R SPARK ARRESTOR & HPS ACTIVE TUNE PROGRAMMER
Regular price
$384.00
Sale price
$299.00
Save $85.00
The NEW HPS Performance Insert/spark arrestor is the easiest and most affordable performance you can add to your Yamaha YXZ1000R Side x Side. Constructed with a 100% forest approved non-corrosive, high quality 304L Stainless Steel spark arrestor screen allowing you to not only add over +4 HP to your machine but keep you completely responsible and legal as you continue to enjoy your favorite recreational areas. With 60% more flow through your stock exhaust and more performance sound there is no need to buy loud slip-ons or expensive full exhaust systems. Coated in our Platinum Lite Ceramic for heat retention and a rich metallic finish.
Combine the HPS Performance Insert with our new HPS Active Tune Programmer and add an additional +2 HP, total of +6 HP. Pre-programmed for the HPS YXZ Performance Insert for optimal performance. Easy, push button adjust-ability for any future modifications and climate change.
NOTE: Plugging the exhaust smog vents on engine valve cover is recommended/necessary when doing any performance mods on the YXZ.
Features: -Dyno tested and proven. -Minimal increase in sound levels for a quiet system. -All stainless steel construction. -Oversize outlet. -100% forest approved. -Very affordable and easy to install.
The HPS Performance Insert/spark arrestor is the easiest and most affordable performance you can add to your Yamaha YXZ1000R Side x Side. Constructed with a 100% forest approved non-corrosive, high quality 304L Stainless Steel spark arrestor screen allowing you to not only add over +4 HP to your machine but keep you completely responsible and legal as you continue to enjoy your favorite recreational areas. With 60% more flow through your stock exhaust and more performance sound there is no need to buy loud slip-ons or expensive full exhaust systems. Coated in our Platinum Lite Ceramic for heat retention and a rich metallic finish.
NOTE: Plugging the exhaust smog vents on engine valve cover is recommended/necessary when doing any performance mods on the YXZ.
Features: -Dyno tested and proven. -Minimal increase in sound levels for a quiet system. -All stainless steel construction. -Oversize outlet. -100% forest approved. -Very affordable and easy to install.
